Vorsprung Luftkappe Fox 36 2018+ Evol
Vorsprung Luftkappe for the 2018+ Fox 36 forks with the Evol air spring. This Upgrade Reduces hand fatigue by offering better small bump compliance and mid stroke support.
Make a good fork a great fork
Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for:
34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted)
34 Float NA2 Evol (2018+) Performance & Factory Series
36 Float NA2 Evol (2018+) Performance & Factory Series
36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel)
Installation tools also available
See bottom of page for full compatibility & incompatibility details.
"The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections."
Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork.
- Softer initial stroke
- Larger negative air chamber
- Increased sag without the associated diving
- Coil-like initial & mid-stroke spring rate without excessive bottoming
- Increased sensitivity
- Improved mid stroke support & control
- Superior bump compliance and traction
- Reduced hand fatigue
- Reduces required compression damping
- Retains volume spacer compatibility
- Optional tools available for self-install